1. Introduction
The EN sole flexure tester is a professional device used to evaluate the flexibility of shoe soles to evaluate durability and quality. Proper execution of its operating procedures is essential to ensure accurate test results. This article will detail the operation steps of the sole flexure tester so that users can perform the test correctly and efficiently.
Two. Preparation
Adequate preparation is key to ensuring that the testing process runs smoothly. First of all, check the appearance of the sole bending tester to ensure that there is no damage or abnormality, such as loose cracked parts, etc. Next, double-check the cord and plug to make sure they are not damaged and securely connected. At the same time, check whether the power switch is working properly to ensure that the device starts and shuts down smoothly. Finally, a simple function test is carried out, such as starting the device to observe whether the status indicator is working properly, and checking each function through the control panel.
3. Steps
1: Access AC 220V 50 60Hz power supply.
2: Turn on the main power boat switch and clockwise knob to turn on the emergency stop switch power supply.
3: Enter the language selection, English page.
4: Introduction to the keys (clear key, jog key, return key, setting key, start key, stop key).
5: Set the key to enter the parameter setting page and set the number of tests. Speed, (time, counting mode selection).
6: Prepare the specimen and test tools (hex wrench, slot knife).
7: Open the safety cover of the machine, and the safety cover is out of the door limit switch.
8: The rotating shaft of the grip should install the specimen in the lowest position, if it is not in the lowest position, click the controller jog button to let the grip run to the lowest position.
9: Take the Allen wrench and unscrew the fixing screw of the upper fixture, fix the test sample in the fixture and tighten the screw, the machine can make 6 samples at the same time, (the 3-station machine can do 3 samples).
10: Click the jog button to move the specimen to the highest point.
11: Use a groove knife on the sole in the center of the shaft, insert a notch, and test the width of the notch with a caliper (remember that width).
12: Clear the current data and set the number of tests. Click Start to start the test.
13: When the machine movement reaches the set number of times, it will stop automatically.
14: Open the cover, click the jog button to move the fixture to the highest position, and measure the notch width again (compare the size of the notch width before and after the test to judge whether it is qualified).
15: Remove the specimen after the test is completed.
4. Maintenance and cleaning
In order to guarantee the long-term stability and test accuracy of the sole bending testing machine, maintenance and cleaning are essential. Maintenance includes regular inspection of equipment components to ensure integrity and necessary repairs or replacements. Cleaning includes surface cleaning of the equipment and handling of test samples to maintain cleanliness and accuracy for subsequent testing.
Equipment maintenance: Regular maintenance not only extends the life of the equipment, but also improves the reliability of the test results. Regular inspections of mechanical structures, electronic components, and connections can identify and resolve potential problems in a timely manner to prevent failures or performance degradation. In addition, regular lubrication of moving parts reduces friction and wear and ensures smooth operation.
Regular cleaning: Cleaning the surface of the shoe testing machine removes dust, dirt, and other debris, maintaining its appearance and minimizing the impact of contamination on test results. Similarly, proper handling of test samples (e.g., storage, recording, or further analysis based on test results and requirements) can help users better understand the test data and make informed decisions.
Conclusion
By following the correct operating procedures, users can ensure the accuracy and reliability of the EN sole flexure tester test results. Correct operation can not only improve the efficiency of inspection, but also ensure the confidence of the results, providing the necessary foundation for product quality control and improvement.
Hotspot Engine Program