There are two main ways to use the oil in tire refining: direct combustion and distillation to improve the quality. Tire oil has the basic fuel characteristics and composition similar to conventional fossil fuels, and can be used directly as fuel oil, which can be used in industrial enterprises such as cement plants, glass factories, ceramic factories, power plants, steel mills, boiler factories, etc. If you want to further improve the utilization value of tire oil, you can also separate and purify it through distillation equipment, limonene, benzene, toluene, xylene and other chemical basic raw materials can be extracted from tire oil, and tire oil fraction separation can also obtain gasoline and diesel close to the national standard. Therefore, the oil market of tire refining is still quite wide.
At present, the environmentally friendly waste tire refining equipment is also a pyrolysis converter has two kinds of batch and continuous, the former takes about 24 hours to complete a furnace, a loading of 3-20 tons, the advantage is that the technology is mature, the structure is simple, the quality is reliable, the most affordable, a set of conventional models down to about 300,000, the disadvantage is that the production efficiency is not as good as the continuous type; If the latter is semi-continuous, it takes about 15 hours to complete a furnace, if it is fully continuous, it can be produced 24 hours a day, and it is loaded at 15-50 tons at a time, the advantage is that the degree of automation and production efficiency are high, and the disadvantage is that it is expensive, and the semi-continuous type is good, a set of conventional models is about 400,000, and the fully continuous type is more than four or five million or even tens of millions.