The steps to clean up the Vajra lead period are as follows:
Step 1: Soak the diamond in warm water at about 30 degrees for two to three hours to soften the pulp.
Step 2: Use a wire brush for preliminary cleaning, after brushing, put the King Kong back into the water, and then, soak for about 10 minutes, and then stir the King Kong in the water to let the water clean out the loose pulp.
Step 3: Use a paper towel to absorb the residual moisture on the surface, put it in a sealed bag, and put it in a dark place for 24 hours, so that the dilute water inside King Kong will continue to soften the stubborn and difficult to clean the pulp.
Step 4: Take out the King Kong that has been placed for 24 hours from the sealed bag, brush carefully along the texture one by one with a bristle brush, if there is an obvious residue that cannot be brushed clean, continue to repeat the process of soaking and fine brushing.
Step 5: Continue to pack the King Kong after the fine brush into a sealed bag, place it in a dark place, dry it in the shade, be careful not to try to be fast, and use a hair dryer, or put it at the tuyere to let it lose moisture quickly, and it can not be exposed to the sun, let alone placed next to the air conditioner or heating, which will make the water loss of King Kong uneven.
Step 6: When playing King Kong, you must clean your hand, don't dirty your hands and dirty hands directly, so that King Kong will become darker and darker, more and more black, only to keep King Kong's performance clean, in order to play a cow tendon red, thick pulp boutique King Kong.