Do you need to turn on the direction signal when reversing the warehouse?

Mondo Cars Updated on 2024-03-01

Reversing into the garage does not need to turn on the turn signal。In the exam of subject 2, it is not necessary to use the turn signal when reversing into the garage, but to use the left turn signal before parking in the side direction and starting the car out of the parking slope. Please note that during normal driving, you need to wait for the turn signal to come on before starting to turn.

At the same time, during normal driving, after turning on the turn signal, you need to wait for the light to come on before starting to turn, and after the vehicle turns, the turn signal needs to start to return to the right at the same time as the light is on, and then completely return to the center within 3 seconds after the light is on.

If you start to turn when the turn signal is not on, or if you start to turn back when the light is not on, it will be judged as unqualified.

The above information is for reference only, and it is recommended that you check the relevant ** if necessary.

In addition to reversing into storage, there are also the following driving operations that do not require turn signals:

1.Go straight through the junction or go straight on:When going straight through an intersection or going straight, the vehicle does not need to turn, so it does not need to turn its turn signal.

2.Vehicles entering or exiting highways, elevated roads, etc.:In these cases, the vehicle needs to keep going straight, so there is no need to turn on the turn signal either. 3.Vehicles driving at roundabouts, roundabouts, etc.:At these intersections, vehicles need to follow the directions of traffic signs and traffic signals without turning their turn signals.

It is important to note that although turn signals are not required in these situations, drivers still need to pay attention to traffic safety, obey traffic rules, and ensure the safety of themselves and others. At the same time, in the case of the need to turn on the turn signal, the driver also needs to use the turn signal correctly, make sure that the light is on before starting to turn, and return to the turn signal in time after turning.

Related Pages