There may be several reasons why the electric gate valve is not closed properly:
OneThe actuator of the electric gate valve is faulty:
For example, the motor of the electric valve is damaged, the transmission mechanism is faulty, etc., resulting in the inability to close the valve normally.
IIProblems with the control system of the electric gate valve:
For example, there is a failure in the transmission of the control signal, or the control system is not programmed correctly and cannot be closed.
IIIDamage to the gate or seal of the electric gate valve:
Damage to the ram or seal can affect the closing effect of the valve and prevent it from closing completely.
FourthPipe pressure is too high:
If the pressure in the pipeline is too high, it may cause the valve to close inadequately and the pressure in the pipeline needs to be reduced appropriately.
FiveImproper valve installation:
Incorrect installation of the valve or insecure fixing may result in the valve not being properly closed.
To sum up, the reason why the electric gate valve is not closed properly can be caused by a variety of factors such as a failure of the actuator, a problem with the control system, damage to the ram or seal, excessive pressure in the pipeline, or improper valve installation. To locate the problem, it is necessary to comprehensively consider various possibilities and make corresponding repairs and adjustments.
Fujian Detersen valve***