Electroplating is a process of plating a layer of chromium, zinc, gold and copper on the surface of the metal, which makes the appearance of the metal appear smoother, increases the beauty of the item, can well isolate the air, and reduces the speed of oxidation and rust. If the electroplating workshop is very dry, then the electroplating tank will carry static electricity, which will lead to unstable plating quality, and there will be problems such as uneven surface, bubbles, and cracks.
Therefore, the electroplating workshop needs to do a good job in anti-static work, first of all, it is to install grounding in the electroplating tank, connect the electroplating tank with the ground wire, so that the electroplating tank has the grounding function, so that the static electricity can be effectively introduced into the ground, which can effectively reduce the impact of static electricity in the electroplating tank on the quality of electroplating.
The second is to install an electrostatic eliminator on the electroplating tank, which can produce a large number of negative ions, which can neutralize the positive charge in the electrostatic electricity, so as to reduce the static electricity in the electroplating tank to a very low level, so that it will not affect the quality of electroplating. Alternatively, an antistatic agent is added to the plating solution to ensure that the plating operation is not affected.
The second is to improve the air humidity of the electroplating workshop, as long as the ZS-80Z series anti-static humidifier is used to control the air humidity of the electroplating workshop between 45-60%RH, the purpose of eliminating static electricity can also be achieved, because water molecules can neutralize the electrostatic charge, accelerate the escape speed of the electrostatic charge, and in the environment of 45-60%RH, it will not cause the electroplating parts to be damp, which can ensure the quality of electroplating.
ZS-80Z series anti-static humidifier in electroplating workshop adopts ultrasonic oscillation atomization technology to atomize water into 1-10 micron mist particles, spray it into the electroplating workshop to improve air humidity, and the microcomputer control system can control the air humidity between 45-60%RH according to the input air humidity value, which can achieve the purpose of eliminating drying and preventing static electricity, so that you don't have to worry about the quality of electroplating operations being affected by static electricity.