Ultrasonic shaking plate is a common laboratory equipment that is used in various laboratory experiments, such as biology, chemistry, physics, and other fields. It is mainly composed of an ultrasonic generator, an ultrasonic transducer and an ultrasonic shock plate. During use, if it is not properly maintained and repaired, it may affect its performance and service life. Therefore, this article will introduce the maintenance and repair methods of ultrasonic vibrating plates.
1. Maintenance of ultrasonic vibrating plate.
1.Clean.
Clean the surface of the ultrasonic vibrating plate regularly to avoid dust, dirt and other impurities affecting its working effect and service life. When cleaning, you can use a soft, damp cloth or alcohol swab to wipe it off. Be careful not to use corrosive chemicals or sharp tools to avoid damaging the surface of the device.
2.Lubrication.
Lubricate the ultrasonic vibrating plate regularly to keep its moving parts smooth. Generally speaking, the equipment needs to be replaced with lubricating oil after a period of use. In the lubrication process, it is necessary to pay attention to the amount and quality of oil to avoid too much or too little affecting the normal operation of the equipment.
3.Fasten.
Regularly inspect and tighten the various connection parts of the ultrasonic shock plate, such as screws, nuts, etc., to avoid abnormal work or potential safety hazards caused by loosening. During the tightening process, attention and sequence are required to avoid damaging the device or affecting its performance.
4.Power supply and cables.
Regularly check whether the power supply and cable of the ultrasonic vibrating plate are intact, and replace them in time if they are damaged or aging. At the same time, it is necessary to ensure that the equipment is not overloaded during use, so as not to cause potential safety hazards such as overheating or short circuit of the power supply.
Second, the maintenance of ultrasonic shock plates.
1.Generator failure.
If the ultrasonic generator fails, it may cause the device to not work properly. In this case, you can check whether the power plug of the generator is plugged in, whether the cable is in good contact, and whether the fuse is blown out. If the generator fault cannot be eliminated, it is recommended to contact professional maintenance personnel for maintenance.
2.Transducer failure.
The transducer is one of the core components of the ultrasonic shock plate, and if it fails, it may cause the equipment to fail to produce ultrasonic waves or abnormal ultrasonic output. At this time, you can check whether the connecting wire of the transducer is in good contact, whether the cable is short-circuited or broken, etc., and it is recommended to contact professional maintenance personnel for maintenance.
3.Shock plate failure.
If the ultrasonic shaker plate fails, it may cause the device to not work properly. At this time, you can check whether the connecting wires of the vibrating plate are in good contact, whether the cables are short-circuited or broken, etc. If the vibration plate fault cannot be eliminated, it is recommended to contact professional maintenance personnel for maintenance.
4.Other failures.
In addition to the above common faults, the ultrasonic shock plate may also have other faults, such as control panel failure, equipment overheating, etc. For these failures, you can try restarting the device or check if the device's control panel is working properly. If the problem persists, it is recommended to contact a professional maintenance personnel for maintenance.
In conclusion, proper care and maintenance is essential to extend the service life and improve the performance of ultrasonic shabor plates. In the process of daily use, it is necessary to pay attention to the maintenance and maintenance methods of the equipment, regularly inspect and clean the surface of the equipment, replace the lubricating oil, and tighten the various connection parts. If the fault cannot be eliminated, professional maintenance personnel should be contacted in time for maintenance.