Cement floor hardener construction technology is a new type of ground treatment technology, which makes the ground more wear-resistant, non-slip and beautiful by applying hardener on the cement floor. This technology is widely used in factories, warehouses, workshops, parking lots and other places. This article will introduce the construction process, technical points and precautions of cement floor hardener construction technology.
First, the construction process.
1.Ground treatment: clean up the oil, dust and other impurities on the surface of the ground, repair uneven places, and ensure that the ground is flat and clean.
2.Primer: Paint a layer of primer on the surface of the ground, the role of the primer is to seal the capillary pores of the cement floor and enhance the adhesion of the hardener. The primer should be applied evenly and without omission.
3.Application of hardener: The hardener is diluted proportionally and evenly applied to the ground to allow it to penetrate into the concrete floor. The amount of hardener should be controlled when applied, and too much or too little should be avoided.
4.Grinding the ground: After the hardener is dry, use a grinder to grind the ground to make it smoother and smoother. Pay attention to the force and angle when grinding to avoid damage to the ground.
5.Painting topcoat: After the grinding is completed, a topcoat is painted on the ground, and the function of the topcoat is to improve the brightness and flatness of the ground, and at the same time, it can also enhance the anti-slip performance of the ground. The topcoat should be applied evenly and without omission.
6.Maintenance: Ground maintenance takes a certain amount of time, during which it is necessary to avoid damage to the ground. After the curing is completed, the construction of the cement floor hardener is completed.
Second, technical points.
1.Material selection: choose the best hardener and primer to ensure the construction effect and service life. At the same time, it is necessary to choose the appropriate material and ratio according to the specific situation of the ground.
2.Construction environment: Pay attention to the ambient temperature and humidity during construction, and avoid construction at too high or too low temperature and humidity. At the same time, it is necessary to pay attention to indoor ventilation and maintain indoor air circulation.
3.Painting skills: When painting primer and topcoat, it is necessary to master the painting skills, and the brushing should be even, thin and consistent, and there should be no obvious brush marks or bubbles.