The process flow of butterfly valve maintenance is as follows:
OneDismantling the butterfly valve:
The butterfly valve is removed from the piping system and its individual parts are separated.
IICheck the parts:
Disassembled parts are carefully inspected to find out which parts need to be repaired or replaced.
IIICleaning parts:
Clean the individual parts of the butterfly valve to remove all dirt and corrosion.
FourthReplacement of damaged parts:
If there are damaged parts, they need to be replaced.
FiveCarry out wear repair:
Repair damaged or worn parts to restore them to normal working condition.
SixAssembling butterfly valves:
Reassemble all parts to ensure that each part is properly installed and positioned.
SevenTake the test:
The assembled butterfly valve is tested to ensure that it is working properly.
EightInstalling the butterfly valve:
Install the tested butterfly valve into the original piping system.
NineMake adjustments:
Make the necessary adjustments to the installed butterfly valve so that it can adapt to the actual working environment and requirements.
XComplete Repair:
After the maintenance of the above steps, the butterfly valve was restored to normal working condition and put into use.
Detersen butterfly valve