H80 brass extruded rod is a high-quality brass material that is widely used in various engineering and manufacturing fields. It has good strength, corrosion resistance and thermal conductivity, and can maintain stable performance in various environments.
H80 brass extruded rods are made by an extrusion process, which makes the internal structure of the material more dense, thereby improving the mechanical properties of the material. Compared with the traditional casting process, the extrusion process can better control the grain size and distribution of the material, further improving the comprehensive properties of the material.
The advantage of H80 brass extruded rod is its high strength and good plasticity, which can be stable in the processing of various complex shapes. In addition, due to its excellent corrosion resistance, H80 brass extruded rod can be widely used in marine engineering, chemical industry and other fields. At the same time, its good thermal conductivity also makes it have a wide range of application prospects in electronics, electrical appliances and other fields.
The manufacture of H80 brass extruded rods requires a number of processes, including melting, extrusion, cooling, and straightening. In the manufacturing process, process parameters such as temperature and pressure need to be strictly controlled to ensure the quality and performance of materials. At the same time, quality inspection and control are required during the manufacturing process to ensure that each bar meets the requirements.
In conclusion, H80 brass extruded rod is a high-performance brass material with good strength, corrosion resistance, and thermal conductivity, which can be widely used in various engineering and manufacturing fields. With the continuous development of science and technology, the application prospect of H80 brass extrusion rod will be broader.
Grade: H80 brass extruded rod
c24000
Corresponds to the standard YS T 649-2018
Copper and copper alloy extruded rods
extruded rod and bar of copper and copper alloys
Classified as copper and copper alloys
Performance: Corrosion resistance, impact toughness
Tags: Brass
Description H80 ordinary brass has similar properties to H85, with higher strength, better plasticity and higher corrosion resistance, and is used as thin-walled pipes, wrinkled pipes, paper nets and house construction supplies. Tensile strength b (mpa): 265, hot working temperature 820 870;Annealing temperature 600 700 ;Low temperature annealing temperature 260 °C for internal stress relieving.
H80 chemical element composition content (%)
Composition fe p * s * cu as * pb sb * other total more
Minimum - 785 - zn: margin
The maximum value is 005 0.005 0.002 81.5 0.005 0.05 0.002 0.3
Other individual or other aggregate chemical compositions include chemical compositions with values not specified in the table. Analysis should only be carried out if it is assumed to be present or in routine analysis, and there are indications that its components will exceed the specified values.
h96、hsn61-0.8-1.The chemical composition of 8 grades of bars shall conform to the provisions of this standard, and the chemical composition of other grades of bars shall conform to the provisions of the corresponding grades in GB T 5231-2012.
is the impurity content of H80 for special purposes, which also includes Fe 007%, the sum of impurities 02%
The iron content of brass for diamagnetic use is 003%
H80 mechanical properties
Diameter (to margin) Tensile strength Elongation or elongation after fracture Hardness
d σb δ hbw
mm mpa %
d≤120 ≥275 ≥45 -
Let's record my city