The plugging bladder used in the pipeline is a high-pressure sealing device made of natural rubber. They are designed to create temporary seals in pipes to prevent water flow or gas leakage. However, there are a few things to keep in mind when using a plugging airbag to ensure a safe and effective seal.
First, make sure you understand the operating and maintenance instructions before using the occlusion bag. Read and follow the manufacturer's guidelines to ensure proper use and storage of the closure bag. Also, regularly check the integrity of the airbag for any signs of wear, damage, or aging. If you find any problems, stop using them immediately and contact a professional for repair or replacement.
Second, make sure that there is enough space in the tubing to accommodate the airbag before installing the plugging airbag. If the tubing is too narrow or curved too much, the plugging airbag may not fully deploy and may be damaged. Also, avoid installing plugging airbags on curved sections of water pipes or other pipes, as this may obstruct water flow or cause other problems.
Clean the inside of the tubing thoroughly before inserting the plugging bag to ensure that there is no residue or obstruction affecting the closure effect. Use an appropriate tool or brush to remove impurities and dirt from the pipes. In addition, check the direction of water flow in the pipe to ensure that the plugging airbag is placed in the same direction as the direction of water flow.
When the plugging airbag successfully seals the pipe, it is subjected to the pressure of a high-pressure stream of water or gas. Therefore, extra care needs to be taken when using the occlusion bag to avoid accidental rupture or damage. Avoid using too much force or pressure on the tubing to avoid damage to the plugging airbag. At the same time, regularly check the sealing performance of the plugged airbag to ensure that it is working properly and prevent leakage.
Finally, please be safe when using the plugging airbag. Always keep it disconnected from the pipes and check the surroundings for flammable, toxic, or hazardous substances before use. Avoid the use of plugging airbags in flammable environments and ensure that the work area is well ventilated. In addition, relevant safety regulations and operating procedures are followed at all times to protect yourself and others.
In conclusion, the above precautions need to be taken when using high-pressure plugging airbags to ensure a safe and effective seal. Be sure to read the manufacturer's guidelines carefully and follow the procedure. If you have any questions or encounter any problems, please contact a professional for consultation and assistance.