According toRadiographic inspection of tension clampsAccording to statistics and on-site inspection results, serious defects can be divided into two main categories: installation defects and operational defects. Installation defects, as the name suggests, are the most obvious problems in the installation process of tension clamps;The operation defect is a problem caused by the operation of the road after the installation of the tension clamp. These two types of defects differ not only in the stages of generation, but also in their actual impact and coping strategies.
Among them, six typical defects, such as the anti-skid groove is not compressed, the anti-skid groove leakage, the core wire is not crimped, the aluminum wire is scattered, the steel anchor is broken, and the core wire is broken, which is caused by improper operation during the installation process and belongs to the installation defectsThe bulging defect is caused by natural environmental factors, which is a defect caused by natural causes.
After in-depth understanding of the causes of defects, we must strictly follow the installation procedures of wire clamps. During the installation process, we must be rigorous to ensure that every step of the process meets the specifications. Once the tension clamp has been installed, we must verify the results and carefully check the crimp quality to minimize defects.
Through the statistical analysis of the defects of the tension clamp, we have clarified the probability of the occurrence of various defects. For those parts that are most prone to defects, such as anti-slip grooves and aluminum wires, we should carry out a more detailed inspection. In the construction process, we must improve the construction system to ensure the stability of the construction quality.
At the same time, choosing the right testing equipment is also crucial. This not only helps us to find problems in time and ensure the quality of the clamps, but also ensures the safety of electricity. Therefore, inspecting the crimping quality of the clamp is an indispensable part of the entire process.
Suzhou Padence PDS-1417M series X-ray flaw detection digital non-destructive imaging systemseries, specially designed for the power industry, is committed to the tension clamp, splicing pipe and other key power fittings of DR testing equipment. This portable equipment, like the guardian of the power industry, silently guards the safety of details, so that hidden dangers have nowhere to hide.