Isn't it particularly inconvenient to travel on a business trip without a computer?At present, many netizens bring their own laptops to go out, so that they can work and play anytime and anywhere, but it will still look very bulky. Usually when I go out, I can take my mobile phone and power bank, because my mobile phone can retrieve remote computer data anytime and anywhere, so that when I play, I am not afraid of the leader suddenly asking for data.
In the early days, if you want to retrieve the data of the remote computer, you need to keep the computer on 24 hours a day, which is particularly power-intensive, and the computer data is also stolen. Now I use a smart plug-in board that can be remotely turned on and off, and with the Sunflower remote control software, I can remotely obtain computer data.
This plug-in board is a sunflower boot plug P1Pro,It can not only be used as an ordinary power strip,At the same time, it can also be networked to realize remote control of computers、Fish tank、Home appliances and other equipment,If you control the computer,You need to turn on the computer's call to wake up the function to achieve remote boot effect。
This power strip is equipped with 4 five-port sockets, each socket can be turned on and off separately through the mobile phone, and the cord length is 21 meter, working temperature -10° 40°, support surge resistance 1kV, flame retardant grade V0, maximum power 2500W, maximum current 10A.
This plug board plug is a standard three-phase plug, supports three-phase power supply, and is backward compatible with two-phase power supply, the wire has a built-in three-strand 1m wire core, the wire core is 33% thicker than before, good conductivity, low heating, even if it is connected to external high-power (less than 2500W) household appliances, it is still no problem.
The power strip housing is designed to withstand 750°C high temperature flame retardant PC, so there is no need to worry about high-power device access, and the five-port socket spacing is relatively large, which can easily cope with different sizes and shapes of plugs. In addition, the socket is equipped with a child protection safety door, and a single hole requires more than 75N (about 15 catties) of force to open, and the socket supports tens of thousands of plugging and unplugging, so it does a good job in terms of safety and durability.
In addition, there is a physical switch button at one end of the socket, and it is also a reset button, and there is an LED indicator around the button, short press: the plug-in board is powered off, and long press: reset (5 seconds), and the operating status of the socket is judged by the indicator light (the indicator light is off: the power-off state;Blue light flashing: In initial configuration;Solid blue light: connect to the app normally;Solid white light: normal networking;White light flashing: Unable to connect to Wi-Fi Disconnected from server Configuration failed;Blue and white lights flashing alternately: firmware upgrade).
Sunflower boot strip P1Pro currently only supports 24G wireless connection, does not support 5G wireless network band. Before adding the plug-in board, be sure to place it in a place with strong wireless signal, which is conducive to improving the success rate of adding the plug-in board networking, as long as the plug-in board becomes a white light that is always on, it means that the network is successful.
Of course, you can also choose Bluetooth connection, which can also be successfully bound.
Sunflower boot plug plug P1Pro's distribution network is relatively simple,If you need to connect and retrieve remote computer data,You also need to enter the BIOS settings of the computer,Turn on the incoming call boot function,At the same time, you also need to install the sunflower remote control Windows version,So that you can achieve the purpose of remotely retrieving computer data。
The above picture shows the operation steps of the intelligent distribution network of the plug-in board: add intelligent hardware - search for nearby intelligent hardware (in this case, it should be searched out through Bluetooth signals) - set up the network - after the network is successfully configured, all hardware will display the boot plug of the sunflower, and the green dot indicates the current **, and the gray dot indicates the current not**.
The picture above is the sunflower remote control software on the computer side, and the host power supply in the living room must be connected to the corresponding plug-in board socket, so that you can remotely control the computer through your mobile phone.
To tell the truth,The sunflower remote control operation on the mobile phone is really very simple,You only need to bind the host added to the system at the corresponding power supply position,At the same time, this power strip also supports countdown and timing functions,This is more power-saving。
After successfully connecting with the remote computer, you can control the controlled computer through the sunflower remote control software on the mobile phone. I usually use this control software to retrieve remote computer data, and after the retrieval is completed, it is turned off, which not only avoids wasting power, but also ensures the security of computer data.
Berry Sunflower launched this boot strip P1Pro,No matter its performance in hardware,Or in terms of software,It's done very well,Up to 2500W load power、Up to 750°PC flame retardant material、Children's door with pressure of more than 15 pounds、Intelligent linkage remote control and many other functions,Make this plug-in board safer to use、More intelligent。 All in all, this smart power strip of Berry Sunflower is very suitable for users who need remote control, and friends who like it may wish to pay attention to it!
By the way, there has been an official activity recently, the first 4 hours are 89, and the second piece is half price, interested partners may wish to learn about it.