The non-powered rotary brush belt cleaner is an important auxiliary equipment for belt conveyors, which can efficiently remove the adhesion on the surface of the rubber belt, which is of great significance for prolonging the service life of the conveyor belt and idler, improving the environment, and saving material and human resources.
The specifications of this series of products cover all bandwidths, with a total of more than a dozen specifications, and users can choose arbitrarily according to their on-site usage.
The structural characteristics of the non-powered rotary brush belt cleaner mainly include transmission rollers, sweeping brush rolls, transmission support arms, self-aligning bearings, locking screws, connecting plates, fixing bolts, support shafts, support bushings, fixed shafts, spiral adjustment buckles and other components.
The working principle is that the cleaner is installed on the frame of the belt conveyor through two connecting plates, so that the transmission roller is in contact with the upper surface of the conveyor return belt;Adjust the spiral adjustment clasp so that the tip of the bristles of the sweeping brush roll is in slight contact with the lower surface of the return belt. When the conveyor is running, the friction is used to make the transmission roller rotate with the conveyor, and the cleaning brush roll is driven to rotate through the transmission support arm. The rotation direction of the cleaning brush roll is opposite to the direction of movement of the return belt, so that the attachment adhered to the lower surface of the return belt is swept down to achieve the purpose of cleaning.
The parameters of the non-powered cleaner include the brush diameter, the filament length, the filament diameter, and the material and length specifications of the two-end mount. Among them, the diameter of the brush is 240mm, the length of the brush filament is 5-6cm, and the diameter of the brush filament is 11-1.5mm, there are two kinds of plastic and cast iron mounts, and the length specifications are 500mm, 650mm, 800mm, 1000mm, 1200mm, 1400mm, 1600mm, 1800mm, 2000mm are standard specifications, and other specifications need to be customized.
The non-powered rotary brush belt cleaner is a new product with innovative design, which has the following advantages compared to the current commonly used cleaners: optimized design, easy installation, easy adjustment, simple and practical;There is no need for power supply and control devices, only 1-2% of the conveyor power is increased, saving materials and energyThe cleaning point is elastic contact, the method is reasonable, and the effect is good;There is no wear and tear on the conveyor belt, and there is no scratch, which effectively prolongs the service life of the beltThe cleaning process does not interfere with the normal operation of the conveyor;Safe and reliable, low failure rate, long service life, low maintenance cost;The bristles can be made of high elasticity and wear-resistant nylon filament, or anti-static and high-elasticity nylon filament, wear-resistant rubber and other materials, which are suitable for the needs of users in various industries.