Glass water is a common cleaning product used to clean glass surfaces to keep them clear and transparent. There are many brands of glass water on the market, but many people don't know that in fact, we can make our own glass water, which is not only safe and reliable, but also economical. In this article, the veteran driver of Tongyi Lubricating Oil will introduce how to mix the glass water by himself, including the required materials, steps and precautions, as well as the environmental protection and economy of mixing the glass water by himself.
1. Required materials.
Purified water: It is recommended to use purified water with no impurities and no peculiar smell, such as mineral water or filtered tap water.
White vinegar: White vinegar has a good decontamination ability and can effectively remove dirt and water stains from the glass surface.
Dish soap: Dish soap has a great ability to remove oil and can help remove oil stains and fingerprints from glass surfaces.
Fabric softener: Fabric softener can make glass surfaces smoother and reduce the occurrence of water stains.
Second, the deployment steps.
Prepare a clean container, such as a plastic or glass bottle.
Add purified water, white vinegar and dish soap to the container in proportion. In general, purified water accounts for 60%, white vinegar for 30%, and dish soap for 10%. The ratio can be adjusted according to individual needs.
Stir well so that the three ingredients are fully combined.
Add the fabric softener and continue stirring until completely dissolved.
Once blended, pour the glass of water into a watering can or other spray utensil and you're ready to go.
3. Precautions.
Choose pure water without impurities and odors, so as not to affect the cleaning effect and service life of glass water.
The ratio of white vinegar to dish soap needs to be moderate, too much white vinegar may cause white mist on the glass surface, while too much dish soap may make the glass surface sticky.
Pay attention to hygiene during the blending process to avoid dust and other impurities from entering the glass water.
When using glass water, it is recommended to spray it on the cloth first and then wipe the glass surface to avoid water stains caused by spraying directly on the glass.
Homemade glass water has no preservatives, and it is recommended to keep it sealed after each use to avoid spoilage.
Fourth, environmental protection and economy.
Environmental protection: Most of the glass water on the market contains chemical components, which has a certain pollution to the environment. The main ingredients of the glass water prepared by ourselves are pure water, white vinegar and dish soap, which are common items in daily life and are harmless to the environment.
Economy: The glass water on the market is expensive, and the cost of self-blended glass water is very low. Just buy some purified water, white vinegar, dish soap and fabric softener and you're good to go. At the same time, homemade glass water can be adjusted according to individual needs, which is more economical.
In short, mixing your own glass of water is safe, environmentally friendly, and economical. Through the materials, steps and precautions introduced above, I believe you have mastered how to mix glass water by yourself. Unified lubricating oil should be added here is that although it saves a lot of money by blending it yourself, you must pay attention to the shelf life.