A filter absorber is a kind of equipment used to filter and absorb harmful substances and gases in the air, and is often used in industrial production, laboratories, hospitals and other places. Here's how to install the filter absorber:
Determine the location of the installation: The filter absorber should be installed in a well-ventilated area, such as a wall or roof. At the same time, it should be avoided to be installed in places with high temperature, high humidity, pollution sources, etc.
Prepare the installation tools: Installing the filter absorber requires the preparation of the corresponding tools, such as gloves, screwdrivers, wrenches, etc.
Dismantling the packaging: Before installation, the packaging of the filter absorber should be removed for better installation.
Install the filter element: Install the corresponding filter element according to the model and specification of the filter absorber. In general, the filter cartridge should be mounted on the bottom or side of the device.
Connect the ducts: Connect the filter absorber to the ventilation duct or other equipment as needed. Attention should be paid to tightness when connecting to prevent gas leakage.
Commissioning and operation: After the installation is completed, the commissioning operation should be carried out to check the operation of the filter absorber to ensure that it can work normally.
In summary, the installation of the filter absorber needs to be carried out in a well-ventilated area and the corresponding steps should be followed. At the same time, attention should be paid to safety during the installation process to prevent injury to personnel or damage to the equipment due to improper operation.