Sewage tank vertical expansion joint leakage repair company reservoir floor joint chemical grouting

Mondo Social Updated on 2024-01-31

Sewage tank vertical expansion joint leakage repair company reservoir floor joint chemical grouting plugging

The following steps can be referred to for the leakage repair of the vertical expansion joints of the sewage tank and the chemical grouting plugging of the floor joints of the reservoir

1.Clean up all trash and stagnant water from expansion joints and cracks.

2.Expansion joints and cracks are filled with special chemical materials and ensure that they are adequately filled.

3.Make sure that no people or animals enter this area before the filler material dries to prevent any toxic substances from harming them.

4.Once the grouting is complete, a water seepage test can be attempted to ensure that water does not enter the building through the expansion joints.

5.When carrying out such operations, it is necessary to choose experienced and qualified workers to ensure the safety and effectiveness of the operation.

Overall, these methods require people to do it to ensure safety and effectiveness. The method of chemical grouting and plugging of the floor joint of the reservoir is as follows:

Chemical grouting materials, such as polyurethane, acrylamide, etc., can be used to plug leaks. The construction steps are as follows:

1.Clean up the leaking base surface and make sure the base surface is clean and tidy.

2.Blending: The chemical grouting material is configured according to the proportion and fully stirred.

3.Drilling: Drill holes at the leakage point with a moderate diameter and depth.

4.Install the grout needle: Insert the grout nozzle into the hole, making sure it is secure.

5.Start grouting: Connect the chemical grouting pump to the power supply, turn on the switch, and start grouting.

6.Successful plugging: Observe the leakage and dripping of the base surface, indicating that the grouting has been successful.

7.Clean up the site: After the grouting is completed, clean up the residual materials on the site in time.

It should be noted that during the chemical grouting process, the pressure should not be too high to prevent damage to the pool floor.

The above content is for reference only, it is recommended to find someone to deal with it, they have more suitable handling methods and experience.

Sewage tank vertical expansion joint leakage repair company reservoir floor joint chemical grouting plugging

Related Pages