Sewage pipeline grouting waterproof plugging cement pipeline crack leakage treatment
To carry out sewage pipeline grouting waterproof plugging and cement pipeline crack leakage repair, you can refer to the following steps:
1.Identify the location of the water leak and mark it.
2.Cut the position of the pipe according to the marker to ensure that the leak stops leaking.
3.The cutting position is haired to make the surface rough for later grouting.
4.The perimeter of the pipe is cleaned to facilitate later grouting.
5.Use a grouting machine for grouting, adjusting the pressure according to the leakage.
6.Apply a layer of waterproof coating to the cracks to enhance the impermeability in the later stage.
7.Observe for 24 hours to ensure that there are no water seepage points and no new cracks.
If it is difficult to operate on your own, you can ask for help. It is important to pay attention to safety when performing this type of work to avoid accidents such as injuries. Also, if the pipeline needs to be repaired, choose a cement pipe manufacturer.
The following methods can be used to repair the cracks in cement pipelines:
1.Permeable plugging agent waterproof layer: making a layer of permeable waterproof plugging agent on the surface of the cement pipe with cracks can play an anti-seepage effect.
2.Grouting method: if the crack width is more than 03 cm, you can choose a special grouting equipment, through pressure pouring epoxy resin, can play a repair effect, and a layer of waterproof layer can be added in the later stage.
3.Cement casing: The sealing of the cement pipeline can be improved through the cement casing, so as to prevent water leakage through the cement pipeline.
4.Apply waterproof tape: You can clean the leaky part of the cement pipe first, and then wrap it around the leaking part with waterproof tape. If the leakage is severe, it can also be repaired with a fiberglass cloth.
5.Replace the pipe section: If the cement pipeline leaks seriously and the maintenance is more difficult, you can also consider replacing a section of the pipe with cracks, and this section of the pipe should be replaced with a pipe section with better quality and no cracks.
The above methods are for reference only, and it is recommended to take corresponding methods to deal with them according to the specific situation of cement pipeline crack leakage.
Sewage pipeline grouting waterproof plugging cement pipeline crack leakage treatment