Punching and shearing machine instruction manual.
Product name] punching and shearing machine.
Product use] It is used for punching, shearing and other processing operations of metal materials.
Safety Precautions].
1.Before using the punching and shearing machine, please be sure to read and understand the contents of this manual.
2.Operators should be professionally trained and strictly follow the safety operating procedures.
3.Make sure the workplace is clean and tidy and avoid clutter entering the work area.
4.Do not touch moving parts while the machine is running.
5.Regularly inspect the safety device of the machine to ensure that it is working properly.
Steps for use] 1Check whether all parts of the machine are normal and whether the power cord is firmly connected.
2.Adjust the working parameters of the punching and shearing machine as needed, such as shear strength, punching diameter, etc.
3.Place the metal material to be processed on the table of the punching and shearing machine and make sure that it is firmly fixed.
4.Start the machine and perform punching or shearing operations.
5.After machining, turn off the power of the machine and clean up the work area.
Maintenance & Maintenance].
1.Clean the machine regularly to remove dirt and debris.
2.Check the lubrication of the machine and add or replace the lubricating oil in time.
3.Inspect the parts of the machine regularly, and replace them in time if they are found to be worn or damaged.
4.Avoid overload operation of the machine for a long time, so as not to affect its service life.
Troubleshooting] 1If the machine is faulty or abnormal, stop using it immediately and cut off the power supply.
2.To check the cause of the failure, you can refer to the common troubleshooting methods in this manual.
3.If the fault cannot be solved, please contact a professional maintenance personnel for repair.
The above is a simple punching and shearing machine instruction manual, and the specific content may vary depending on the type of punching and shearing machine. When using the punching and shearing machine, be sure to operate it strictly according to the requirements of the manual to ensure safety and normal use. If you have other questions about the punching and shearing machine or need more detailed instructions, you can provide more information, and I will try my best to help you.