Installation of face recognition access control all-in-one machine
1. Prepare the installation environment.
Before installing the face recognition access control all-in-one machine, we need to determine the installation location and check whether the installation environment meets the requirements. Generally speaking, the face recognition access control all-in-one machine needs to be installed on a flat, solid, and unobstructed wall, and the installation location should be convenient for personnel to enter and exit for easy use. At the same time, you need to ensure that there is sufficient power and network connection near the access control device.
Second, the installation steps.
1.Fixed access control all-in-one machine.
Use screws to fix the access control machine on the wall to ensure that its position is flat and secure. If the wall is not vertical or flat, you can use a filler to level it out.
2.Connect the power cord.
Connect the power cord of the access control machine to the power socket, and make sure that the power cord is fixed to avoid loosening or falling off during use.
3.Connect the network cable.
Connect the network cable of the access control all-in-one machine to the network socket, and make sure that the network cable is fixed to avoid loosening or falling off during use.
4.Configure an access control kiosk.
Use a device such as a computer or mobile phone to connect to the management interface of the access control all-in-one machine, and configure it as needed, including setting user information, permission management, etc.
5.Debugging the access control all-in-one machine.
After the configuration is completed, the access control all-in-one machine is debugged to ensure its normal operation. If there is a problem, you can troubleshoot and fix it according to the troubleshooting guide of the access control kiosk.
3. Precautions.
1.During installation, care should be taken to protect the device from damage and avoid scratching the surface of the device with sharp tools.
2.When connecting the power cable and the network cable, make sure that the connection is firm and avoid loosening or falling off during use.
3.When configuring the access control kiosk, make sure that the data entered such as user information and permission management is accurate.
4.In the process of use, it is necessary to regularly check the operation status of the access control all-in-one machine, and find and deal with problems in time.
5.During use, it is necessary to pay attention to keeping the access control all-in-one machine clean and hygienic, and wipe the surface of the equipment regularly to ensure its normal operation and service life.