These magnetic rod inductance heating solutions you know a few gujing
Editor: Gujing Electronics.
Magnetic rod inductance heating in use is one of the more common problems, but if the heating is serious, it needs to be dealt with in time, otherwise it will affect the performance and operation of the equipment. So, what are the solutions to the serious heating of the magnetic rod inductor?
Before discussing the solution, it is important to understand what is the cause of the abnormal heating of the magnetic rod inductor. According to Gujing's many years of project experience, we can make a simple summary of the cause of abnormal heating of the magnetic rod inductor, that is, the reason for the abnormal heating of the magnetic rod inductor is that the inductance value does not match or the current is too large. Of course, the solution is also mainly based on two aspects.
If it has been determined that the heat is caused by excessive current, the heat generation of the magnetic rod inductance can be reduced by reducing the current. For example, the stability of the magnetic rod inductance can be improved by optimizing the circuit design or using a high-efficiency power module to reduce the current.
If the heat is abnormal due to the mismatch of the inductance value, it can be solved by selecting the appropriate inductance inductance. This involves the issue of inductor selection. The selection of inductance value should be selected according to the actual application requirements, not the larger or smaller one.
In addition to the above-mentioned heating anomalies caused by the mismatch between current and inductance, it is also possible that the inductor is incompatible with other electronic components of the circuit. When this happens, the appropriate technician needs to step in to check the analysis. Welcome to consult Gujing on the problem of abnormal inductance heating!