Industrial DoorsIt is the gate of the factory, and of course, it can also be applied to enterprises, construction sites, warehouses, logistics parks and other places. Industrial doors are usually relatively wide, ranging from a few meters to tens of meters, and can stop both cars and people. Industrial doors are generally made of relatively hard alloy materials, and the surface undergoes a special baking paint process and surface treatment process, so that the anti-oxidation and corrosion resistance characteristics of the industrial door are very good, and the general rain, snow and wind will not affect the door body, even in a harsh environment can also operate normally, this article will specifically introduce the structural characteristics of the industrial door.
Industrial doors are mainly divided into sliding doors, swing doors, hanging doors and sliding doors, and their structural characteristics are as follows
Segment sliding door: There are six types of door body styles: fence, mountain, tree, louver, copper coin and square. The sliding door can be assembled and the license plate recognition can be synchronized, and the door body can automatically determine whether to open according to different signals before the vehicle enters. The sliding door possesses a piece of 121 inch high-definition LCD screen, can customize the display content, and at the same time waterproof, sunscreen, anti-leakage. The sliding rail guide wheel assembly is designed between the door row and the door row, which runs smoothly and smoothly, is stable and balanced, and at the same time does not deviate from the road and has good flatness. The door body is equipped with a manual emergency button, which can respond to emergencies in time and ensure the safety of pedestrians and vehicles. The door body can be equipped with reflective film and atmosphere light, which can play a better warning, reminder, lighting and beautiful effect at night. The bottom of the sliding door is made of solid cast aluminum rollers, and the balls made of carbon steel have a very strong bearing capacity, which runs smoothly and is also resistant to wear and skid. The bottom of the door body adopts the design of wind hook, so that the door body chassis is wide, the wind resistance is better, and the installation of I-beam and aluminum alloy guide rails can be selected.
Swing doors: The swing door has five door styles: peaks, copper coins, squares, fences and louvers. The door body is made of high-strength aluminum alloy profile, and the surface is made of electrostatic powder spraying and baking paint process, and the treated surface has strong corrosion resistance; At the same time, the vertical rod is equipped with a vertical rod fixed sleeve above and below, which is more stable and firm. The top of the door adopts Saigang pulley, which has a small friction coefficient and has the characteristics of high hardness, high rigidity and high wear resistance to ensure that the door body slides smoothly and freely. The door body is equipped with an atmosphere lamp and an LCD screen, and the top of the display box is designed with a continuous yellow atmosphere lampThe 1-inch high-definition LCD screen can be customized to display the content. The door body is equipped with a leakage switch, when the circuit fails, excessive current is generated, the operation of the leakage switch can quickly cut off the power supply, realize short-circuit protection, and effectively improve the safety factor. The bottom of the door is made of solid cast aluminum rollers, embedded with high-carbon chromium bearings and steel balls, which has strong load-bearing capacity and smooth sliding; At the same time, the surface of the wheel body is coated with rubber, which makes the door body slide more stable. The top of the control box is designed with red and blue strobe lights, which plays a better role in safety warning. The bottom beam of the door body can be installed with yellow atmosphere lights, which adopts light-sensitive control, which automatically closes during the day and lights up automatically at night, which has a better reminder and aesthetic effect.
Ankuai T902 section slides the door to the door.
Ankuai T902 section slides the door to the door.
Overhang the door: The hanging door has five door styles: fence, tree, copper coin, checkered and mountain. The door body is made of high-strength aviation aluminum alloy, and the surface is made of outdoor powder electrostatic paint technology, which has strong corrosion resistance; The vertical rod is reinforced with upper and lower fixed sleeves, which is more stable and does not swing. The top of the door adopts nylon pulley, which has a small friction coefficient to ensure the stable operation of the door body, and at the same time has good load-bearing capacity and strong impact resistance. The bottom of the door is made of 6-12mm thickened bottom beam, made of high-strength aviation aluminum alloy material, with good overall bending resistance, high hardness and strong wind resistance. The hanging door adopts DC servo waterproof motor, the input is DC24V safe voltage, and at the same time, it has strong cold resistance, waterproof immersion and high temperature resistance, and can be used normally in various harsh environments. The bottom of the door is equipped with a special balance seat, which can improve the overall stability of the door body and make the operation more stable.
Ankuai T921 hangs open the door.
Sliding doors: The sliding door also has six door styles: fence, peak, tree, louver, copper coin and square, and can be used with license plate recognition to achieve the effect of automatic door opening and automatic closing of the car door. The door row is made of high-strength aluminum alloy, and the surface is made of electrostatic powder spraying and baking paint process, and the treated surface has strong corrosion resistance; The upper and lower vertical rods are equipped with vertical rod fixing sleeves, which are more stable and firm. The moving mechanism of the door body adopts Saigang pulley, which has a small friction coefficient and has the characteristics of high hardness, high rigidity and high wear resistance, so as to ensure that the door body slides smoothly and freely. The door body adopts a thickened bottom beam, with a thickness of 5-12 mm, which has strong wind resistance and is more solid. The front and rear of the bottom beam are designed with double-shaft cast aluminum wheel body, embedded with high-carbon chromium bearing steel balls, which has strong load-bearing capacity and smooth sliding, while the surface of the wheel body is coated with rubber to make the door body slide more stable. The bottom of the door adopts a special balance seat design, which greatly improves the stability of the door body, so that the door body runs smoothly and has good wind resistance.
Ankuai T922 smart sliding door.
The above is about the structural characteristics of industrial doors, among which the sliding door, swing door, hanging door and sliding door have their own different characteristics. Industrial doors can be regarded as the largest access control equipment at present, especially suitable for large factories, logistics parks, warehousing institutions, enterprises and institutions. Traditional industrial doors are mostly roller shutters used in workshops, which rely on manual or electric methods to open and close. Today's industrial door has been extended to the access control system at the entrance, which can not only block cars and stop people, but also can be used with license plate recognition like a barrier to achieve the effect of intelligent switch, which is a major breakthrough in modern industrial doors.