Baumüller servo drive repair service
2420：no valid controller for saf module
The SAF module does not have a valid controller.
the controller is not suitable for saf module.
The controller is not available for SAF modules.
the safety level of controller is lower than the safety level of the saf module.
The security level of the controller is lower than that of the SAF module.
2421：number of axes from controller and saf module are not equal
The number of axes of the controller and the SAF module is not equal.
number of axes from controller,
The number of axes of the controller.
dip switch of saf module and safety parameter are not equal.
The DIP switch of the SAF module is not equal to the safety parameters.
2723：cam generator - the output value was limited
Cam Generator - The output value is limited.
the output value of the cam is greater than the maximum value of the target parameter or the output value is lower than the minimum value of the target parameter.
The output value of the cam is greater than the maximum value of the target parameter or the output value is lower than the minimum value of the target parameter.
Baumiller servo drive maintenance and inspection process:
Step 1: Evaluate the repairability of the server based on the customer's fault description.
Step 2: The customer sends it to our company, registers it in the warehouse, and waits for testing.
Step 3: The engineer detects the fault point, issues a test report, and determines the maintenance ** and maintenance cycle.
Step 4: Repair**, wait for customer confirmation. If you agree, you will carry out maintenance, and if you do not agree, the original machine will be returned.
Step 5: Repair OK, test aging with motor.
Step 6: The test machine is successfully registered and shipped out of the warehouse.
Step 7: Customer payment.
Step 8: Delivery to the customer.
Step 9: Intimate tracking service.