Rice sieve is a vulnerable part in rice processing machinery, which will be perforated after long-term operation, affecting normal production. In order to solve this problem, a simple method of repairing a rice sieve by rice processing machinery is introduced below. First, the perforated rice sieve is cleaned and dried, and then a slightly larger sieve is cut and also cleaned and dried. Next, use an abrasive cloth to polish the two sieve pieces, noting that the grinding area of the new sieve is smaller than the perforated sieve piece. Finally, glue the two sieve pieces tightly, and wait for the glue to dry for 24 hours after compaction, and then reinstall and use.
In addition, when it comes to the huller equipment in rice processing machinery, the rubber roller husker is a commonly used one. This type of huller is mainly composed of two elastic rubber rollers in parallel, rotating in opposite directions at different speeds. When the rice flows between the two rubber rollers, it is subjected to pressure and allokinetic friction, causing the husk to break and separate from the brown rice.
The elasticity of the rubber roller is good and will not cause harm to the rice grains. Therefore, with this rubber roller huller equipment, the rice processing machinery has a low broken rice rate during production, and at the same time the output is high and the hulling rate is high. This kind of huller equipment is one of the best in China at present, and the utilization rate is relatively high. Through this simple repair method and the selection of efficient mill equipment, the production efficiency and product quality of rice processing machinery can be effectively improved. Rice processing machinery