1. Technical Description
Stainless steel grinding brightener Yuanmoto M609 is a multi-functional grinding brightener developed by our company that integrates cleaning, grinding and brightening, the product does not contain strong acid, phosphorus and chlorine additives, and is easy to disperse in water, with the functions of degreasing and rusting, descaling, machining scratches and burrs, brightening, color retention, etc., and is suitable for mechanical grinding and polishing of various stainless steel workpieces; The chemical properties of the product are mild, do not damage the material, no scratches after grinding and polishing, remove excess knife lines, sand marks, and increase the brightness of the surface of the workpiece; The product has superior degreasing and rust removal ability, which can clean the oil stain on the surface of the workpiece and achieve short-term rust prevention; The product is made of a variety of high-efficiency surfactants, and adds special detergents and complexing agents, which has good wetting, penetration, emulsification and dispersion capabilities, quickly removes fine burrs and oil stains on the surface of stainless steel workpieces, and efficiently brightens; The product is highly concentrated, with high viscosity, good water solubility, rich foam, low addition amount, and excellent texture; The product is stable, and it is placed for a long time without stratification and segregation. It is suitable for the processing of workpiece products by various polishing equipment, such as vibration polishing machine, magnetic polishing machine, drum polishing machine, vortex polishing machine, centrifugal polishing machine, etc.; The product can also be used for grinding and polishing of copper, aluminum, aluminum-iron alloy, zinc alloy and other materials.
Second, technical parameters
3. Performance advantages
Fourth, the field of application
Fourth, how to use
The specific usage method and dosage are flexibly adjusted according to the actual situation, and the general recommendations are as follows:
1.Select the appropriate machine size and abrasive according to the material of the processed parts and the size of the workpiece;
2.The amount of brightener is added according to about 2 of the sum of the volume of the abrasive and the workpiece, and then water is added; Or dilute it with water 30-50 times and use it; Appropriately increase the dose of parts with serious oil pollution; The amount of water added is generally 3-5% of the container;
3.The polishing time should be determined according to the condition of the workpiece to be machined, and the optimal time is usually found on the basis of process tests.
For more technical details, please call the official customer service**: 400-887-8757
You can contact customer service to apply for a sample, and then transfer it if you are satisfied with the results