SOMS60PB tin brass wire rod is a high-quality metal material that is widely used in various fields due to its good mechanical properties and corrosion resistance.
First of all, SOMS60PB tin brass wire has excellent mechanical properties. It has high tensile strength and elongation, and can maintain stable performance under various complex environmental conditions. In addition, the material also has good hardness, can withstand large pressure and friction, and is not easy to deform or wear.
Secondly, SOMS60PB tin brass wire has good corrosion resistance. Because its surface is covered with a dense oxide film, it can effectively resist the attack of various chemicals. In the marine environment, the material retains its original properties for a long time without rust or corrosion.
In addition, SOMS60PB tin brass wire also has good electrical and thermal conductivity. It can efficiently transmit current and heat, and is suitable for components such as lines and heat sinks in various electrical and electronic equipment.
In conclusion, SOMS60PB tin brass wire rod is a high-quality metal material with excellent mechanical properties, corrosion resistance, electrical conductivity and thermal conductivity. Its wide application shows its important position in modern industry. In the future, with the continuous progress of science and technology and the continuous expansion of application fields, SOMS60PB tin brass wire will play a more important role.
Grade: SOMS60PB tin brass wire
European standard steel grade CUZN37PB1SN1
Corresponds to the standard EN 12166-1998
Copper and copper alloys: general copper wires
Classified as copper and copper alloys
Tags: Complex copper-zinc alloy, Complex brass
Density 84 g/cm3
SOMS60PB chemical element content (%)
Composition fe ni cu pb sn other total more
Minimum - 59 04 0.5 - zn: margin
The maximum value is 01 0.3 61 1 1 0.2
Other individual or other aggregate chemical compositions include chemical compositions with values not specified in the table. Analysis should only be carried out if it is assumed to be present or in routine analysis, and there are indications that its composition will exceed the specified value.
SOMS60PB mechanical properties
Diameter Mark Heat treatment or state Tensile strength Yield point Elongation or elongation after break Hardness
d σb σs δ hbw
mm mpa mpa %
0.1≤d≤20 soms60pb-r350 r350 350~450 ≥15(a100)，
18(a11.3)，
20(a)
0.1≤d≤20 soms60pb-h100 h100 hv: 100~130
1.5≤d≤8 soms60pb-r400 r400 ≥400 ≥10(a100)，
13(a11.3)
1.5≤d≤8 soms60pb-h120 h120 hv: ≥120
All sizes SOMS60PB-MM are not specified not specified not prescribed not specified not to be prescribed
Material status name and character code: H-hardness (Brinell or Vickers), suffix number indicates hardness value; r - tensile strength, the suffix number indicates the minimum tensile strength value; m-manufactured, without specified mechanical properties. See standard EN 1173-2008
a100、a11.3. A-gauge distance
or the equivalent cross-sectional area of the polygonal wire