ASTM B150 UNS C63000 Aluminum Bronze, Aluminum Bronze Bar, Aluminum Bronze Plate, Aluminum Bronze Tube, Copper Sleeve.
It has high strength and good wear resistance It is used for screws, nuts, copper sleeves, sealing rings, etc., and wear-resistant parts, and the most prominent feature is its good wear resistance.
Chemical composition by mass %
cu sn al fe mn ni pb si p zn
Margin 02 9.0-11.0 2.0-4.0 1.5 4.0-5.5 - 0.25 - 0.3
Mechanical properties. Tensile Strength (MPa) Yield Strength (MPa) Elongation % Hardness (HB).
C63000 Chemical Properties:
1. Oxidation resistance: good oxidation resistance at high temperature.
2. Corrosion resistance: It has good corrosion resistance in the atmosphere, fresh water and seawater. It has high corrosion resistance to alkali, non-oxidizing acids, phosphoric acid and sulfuric acid.
C63000 Process Performance:
Molding performance: It has good plasticity at high temperature, and can be used for hot processing, hot forging, hot extrusion and hot bending. The hot processing temperature is 850-900 degrees Celsius.
Welding performance: can be good argon arc welding, can also be used for contact resistance welding, such as spot welding, jet welding and flash welding, but not suitable for soldering and electroslag welding. If gas welding is used, the flame should be adjusted to non-oxidizing.
Cutting performance and grinding performance: The cutting performance of the alloy is 20-30%.
C63000 is mainly used in the manufacture of bushings for aircraft landing gear follower barrels and high-strength bushings, ball seats, booster sliders, guide screws, driven shafts, support rings, fuel distribution valves, connecting rods and nuts for auxiliary structures.