Whether the adsorbent can still be used depends on the specific situation. If the adsorbent is not seriously polluted after the oil and water are fed into the adsorption tower of the dryer, some measures can be taken to regenerate, such as heating, vacuum drying and other methods to restore the adsorption capacity of the adsorbent. However, if the adsorbent is heavily contaminated and has lost its activity, it needs to be replaced with a new one.
For the case of oil and water entering the dryer adsorption tower, it is necessary to stop using it immediately, and check and clean it. First of all, the oil and water in the adsorption tower need to be drained and cleaned, and then the adsorbent needs to be checked for contamination. If the adsorbent is not contaminated, it can be removed to dry and reused. If the adsorbent is heavily contaminated, it needs to be replaced with a new one.
In order to avoid the recurrence of oil and water ingress into the dryer adsorption tower, some precautions need to be taken. For example, it is necessary to ensure that the oil used is of good quality and avoid using oil that contains impurities; At the same time, it is necessary to regularly check the working condition of the dryer adsorption tower to ensure its normal operation, and find and solve problems in time.
In short, for the problem of how to deal with the oil and water after the dryer adsorption tower is fed, it needs to be analyzed and treated according to the specific situation. If the adsorbent is not heavily contaminated, measures can be taken to regenerate it; If there is significant contamination, a new sorbent needs to be replaced. At the same time, precautions need to be taken to avoid similar problems from happening again.
The article ** is on the official website of Shandong Kaiou Alumina.