Power well mold power well mold introduction, power well mold is a kind of mold used for pouring cement power inspection wells, belongs to one of the molds often used in the infrastructure industry, the mold has a simple structure, easy to disassemble, neat appearance and other characteristics, the use of the cycle is also relatively long, next I will introduce the mold from the design structure, use scenarios, production methods three aspects!
The design structure of the power well mold: the design structure of the power well mold is relatively simple as a whole. Compared with the complex structure of the mold such as the gatehouse mold, the amateur can understand the design structure of the power well mold, and can also quickly learn to use the mold, the mold is divided into two parts, the inner membrane and the outer mold, these two parts as a whole are two coverless cubes, and some square well molds are cuboids, the outer mold is provided with fastening components, which is convenient to open the mold for disassembly after the pouring is completed, the inner membrane can be designed as a detachable structure according to the demand, and can also be used as a welding whole, the outer mold will leave holes, and some holes are designed for the convenience of demoulding, and there are also some holes, such as the holes at the bottom, which are designed in accordance with the requirements of the construction party。
The use scenario of the square well mold: the main purpose of the mold is to pour the inspection well, such as the inspection well required in the laying of power lines, and the inspection well will also be used when the water supply pipeline and natural gas pipeline are laid, which is the original intention of the square well mold design, and later with the function of the square cement tank is gradually explored, there are also some projects that use large inspection wells as a reservoir, in short, the use scenario of the mold is still expanding.
Production method of square inspection well: the mold can be prefabricated type, such as a small square inspection well, can also be cast-in-place type, many long construction period of line engineering, will transport the mold to the construction site, according to the need to pour cement inspection well anytime and anywhere, these two types of mold in the outer mold design there are some subtle differences, generally speaking, to decide the use of cast-in-place or prefabricated type, and the size of the square well and the construction cycle of the project is related, no matter what kind of mold the construction party needs, the mold factory can carry out accurate design。