Scraper reducer is a kind of equipment that is commonly used to clean sludge, but there are some common problems that may be encountered during use. The following is a summary of the common problems and solutions of the scraper reducer:
1.Abnormal vibration: The abnormal vibration of the scraper reducer during work may be caused by loose or worn internal parts of the reducer. The solution is to inspect and tighten loose parts and replace worn ones.
2.Reducer heating: The reducer may heat up after working for a long time, which may be caused by insufficient lubricating oil or oil deterioration. The solution is to regularly check the quantity and quality of the lubricant and add or replace the lubricant as needed.
3.Bearing failure: The bearing of the scraper reducer may come out.
It is damaged or worn, which will cause the reducer to not work properly. The solution is to regularly check the condition of the bearings and repair or replace them as needed.
4.Oil seal leakage: The oil seal of the reducer may leak, which will lead to the loss of lubricating oil and affect the normal operation of the reducer. The solution is to check and replace the oil seal of the leak to ensure that the lubrication system of the gear unit is functioning properly.
5.Gear wear: After a long period of use, the gears of the scraper reducer may be worn, resulting in increased noise or reduced transmission efficiency. The solution is to regularly check the gears for wear and tear and repair or replace them as needed.
To sum up, there may be some common problems during the use of the scraper reducer, but through regular inspection and maintenance, as well as timely adoption of corresponding solutions, the normal operation of the reducer and its service life can be prolonged.